Process Engineer: Responsible for the safety, quality productivity of manufacturing processes. Responsible for the Implementation of producti...
[Last Updated: ]
Ceramic Capacitor Processor: Performs any combination of following tasks to process substrate, electrode, and termination materials to fo...
Supervisor Data Processing: Supervises and coordinates activities of workers operating computers peripheral equipment. Assigns staff...
Project Engineer: Provides engineering assistance to make sure compliance with all laws/regulations standard operating procedures. Serves as ...
Stem processing machine Operator: Tends bench machine that automatically fabricates pipestems for corncob pipes. Examines wooden dowels for cracks chips and discards defective dowels. Positions dowel in holding device of stem processing machine. Presses button to start machine that automatically sha...
Irrigation Engineer: Plans, designs, and oversees construction of irrigation projects for transporting distributing water to agricultural lands. Plans and designs irrigation fixtures & installation of fixtures to requirements specifications. Directs, through subordinate supervisors, construction of such irrigation systems as dam...
Processor Solid Propellant: Performs combination of following duties to produce solid-propellant rocket fuel, prepare rocket motor cases for inserting propellant, cast and cure propellant, install propellant ignition components in motor case, prepare assembly for static testing, and pack assembly for shipment. Blends fuel ingredients tends roller mill that grinds mixture to uniform consistency from remote control instrument panel, viewing operations on television monitor. Lowers motor case into degreasing pit filled with solvent, using hoist. Transfers case to sandblasting cabine...
Maintenance Engineer Oil Field: Supervises and coordinates activities of workers engaged in maintaining and repairing mechanical parts of pumps, cranes, compressors, ditch diggers, automobiles, trucks, tractors, pipelaying machines, and similar equipment used in constructing pipelines, transporting oil and other fluids, and in related oil field construction or airport maintenance activities. Inspects defective equipment in shop...
Operator Automated Process: Operates mechanical units of automated production machinery to produce deposited carbon resistors for use in electronic equipment. Turns valves to admit methane and nitrogen gases into carbon-coating furnace sets furnace temperature for computer control according to work order. Presses buttons & turns valves to start vacuum pump of terminating chambers set rate for back-filling chambers with argon gas, pr...
Video Engineer: Controls video console to regulate transmission of television scenes, including test patterns and filmed live black-and-white or color telecast. Views action on television monitor and sets switches observes dials on console to control framing, contrast, brillian...
Facility Engineer: Work with the vendors to make sure building interior and exterior grounds maintenance is in order. Manage Maintenance Inventory, cost control cost reduction for Chemicals, Janitorial Supplies and Cleaning Equipments. Ensure all support equipment is maintained functioning; this includes compressors, air dryer, cooling towers, chillers, fork lifts, fire protection, piping and valves. Manage the energy management program to continual...
Telecommunications Engineering Specialist: Keep abreast of changes in industry practices emerging telecommunications technology by reviewing current literature, talking with colleagues, participating in educational programs, attending meetings or workshops, or participating in professional organizations or conferences. Estimate costs for system or component implementation operation. Develop, maintain, or implement telecommunications disaster recovery plans to make sure business continuity. Test and evaluate hardware software to define efficiency, reliability, or compatibility with ex...
Test Engineer: Develops custom test setups for special mechanical and electrical test requirements, is able to identify then specify any special equipment needs which may be required, can outline plans using drawings and schematics to enable effective communication internal external to the organization. Provides technical guidance and support to both internal external customers. Creates detailed operating procedures & forms adhering to quality and safety standards for the appropriate performance documentation of test setups. Trains and/or directs engineering tech...
Architectural And Engineering Manager: Confer with management, production, or marketing staff to discuss project specifications or procedures. Plan or direct the installation, testing, operation, maintenance, or repair of facilities or equipment. Present explain proposals, reports, or findings to clients. Consult or negotiate with clients to prepare project specifications. Administer highway planning, construction, or maintenance. Direct the engineering of water control, treatment, or distribution projects. Develop or implement programs to improve sustainability or reduce the environmental impa...
Shellfish processing machine Tender: Tends washing, blanching, steaming, brining, peeling, or shucking machine that prepares shellfish for canning, freezing, or fresh packing. Opens valves to admit water, steam, or air under pressure into machine vats and adds specified quantities of additives, like salt or food coloring. Lowers baskets of shellfish into vats by hand or hoist, or pushes cars of shellfish into steamer chamber. Closes door of steamer chamber, clamps fasteners over edges of door, and turns wing nuts to secure door. Starts conveyors that move product through machines or into w...
Electronics Engineering Manager: Directs coordinates activities of engineering department to design, manufacture, and test electronic components, products, and systems. Directs department activities, through subordinates, to design new products, modify existing designs, improve production techniques and develop test procedures. Analyzes technology trends, human resource needs and market demand to plan projects. Confers with management, produc...
Process Control Supervisor: Supervises and coordinates activities of workers engaged in inspecting storing rolls of ce...
Engineering Laboratory Technician: Tests, calibrates, and repairs electrical, mechanical, electromechanical, and electronic measuring, recording, and indicating instruments equipment for conformance to established standards, and assists in formulating calibration standards. Plans sequence of testing and calibration procedures for instruments equipment, according to blueprints, schematics, technical manuals and other specifications. Sets up standard & special purpose laboratory equipment to test, evaluate and calibrate other instruments test equipmen...
Electronics Processing Supervisor: Supervises and coordinates activities of workers engaged in processing electronic components parts, like printed circuit boards Pcbs , electron tubes, and semiconductor devices. Examines product for conformance to specifications quality standards, applying knowledge of manufacturing processes. Demonstrates methods & trains workers in sequence of processing tasks and operation and control of machines equipment. Maintains records prepares cost, yield, breakage, and maintenance reports, manually or using computer terminal. Inv...
Manufacturing Development Engineer: Design, develop, implement and transfer microcircuit manufacturing assembly processes products. Develop and use working knowledge of hybrid microcircuit assembly processes including soldering, bonding, epoxy attach cleaning techniques. Design tooling for assembly processes products. Create automated assembly programs documentation. Tolerance a...
Software Engineer: Perform development, upgrade, install development solutions. Develop framework process for applications project using existing technologies that is implemented in a structured, maintainable fashion. Responsible for coordination, requirements derivation, software design and implementation of projects. Work primarily in deployment and development solutions team with a focus on delivering for ...
Documentation Engineer: Plans, directs, and coordinates preparation of project documentation, like engineering drawings, production specifications schedules, and contract modifications, to make sure customer contract requirements are met. Reviews contract to define documentation required for each phase of project, applying knowledge of engineering manufacturing processes. Schedules due dates for drawings, specifications, software, technical manuals and other d...
Biochemical Engineer: Read current scientific or trade literature to stay abreast of scientific, industrial, or technological advances. Prepare technical reports, data summary documents, or research articles for scientific publication, regulatory submissions, or patent applications. Participate in equipment or process validation activities. Collaborate in the development or delivery of biochemical manufacturing training materials. Prepare piping or instrumentation diagrams or other schematics for proposed process improvements, using computer-aided design software. Modify or control biological sy...
Plant Operator Furnace Process: Controls semiautomatic furnaces auxiliary equipment to produce carbon black by partial combustion of crude oil, natural gas, or mixture of both. Notifies Unit Operators to start or shut down equipment units, like reactors furnaces , quenchers, precipitators, cyclones grit collectors and filters to maintain efficient production. Monitors pyrometers, recording meters and other gauges to verify process conditions as indicated by control panel instruments. Turns valves and moves switches o...
Track Production Engineer: Plans, directs, and coordinates, through supervisory personnel, activities of track maintenance crews of railway system. Analyzes engineering data and inspects repair site to define priority of proposed track repair maintenance projects. Coordinates scheduling of track maintenance activities within designated region. Determines frequency of track use and project costs, ...
Safety Engineer: Develops and implements safety program to prevent or correct unsafe environmental working conditions, utilizing knowledge of industrial processes, mechanics, chemistry, psychology, and industrial health safety laws. Examines plans specifications for new machinery or equipment to define if all safety precautions have been included. Determines amount of weight that can be safely placed on plant floor. Tours plant to inspect fire and safety equipment, machinery, ...
Semiconductor Processing Equipment Production Technician: Cleans and maintains wafer processing machines and equipment mixes chemical solutions, following production specifications. Reads work orders and specifications to define machines equipment requiring replenishment of chemical solutions. Measures & mixes chemical solutions, using graduated beakers funnels. Pours chemical solutions into wafer processing machine tanks to replenish machine supplies. Cleans furnace accessories, like quartz tubes stainless steel tubing, using chemical solutions. Removes broken quartzware a...
Airport Engineer: Plans and lays out airports and landing fields and directs construction work involved in leveling fields, laying out surfacing runways, and providing drainage. Designs runways based on weight and size of aircraft & prepares material construction specifications. Directs or participates in surveying to lay out installations establish reference points, grades and elevations to guide construction. Estimates costs to prov...
Laborer Shellfish Processing: Performs any combination of following tasks concerned with fresh packing, canning, freezing, or smoking shellfish. Transports shellfish, shellfish meats, cans, or cases to work area manually, or using wheeled hopper, handtruck, or power hoist. Loads conveyors, hoppers, or handtrucks with product, cans, or cases. Spreads shellfish on conveyor, drenches them with water, and removes foreign matter. Weighs shellfish or shellfish meat, using scales. Records weight of product on standard form. Sorts shellfish according to size, and trims off unusable portions, u...
Treating engineer Helper: Assists Treating Engineer in impregnating wood products with preserving or fireproofing chemicals, performing any combination of following duties. Opens closes retort door, using pneumatic wrench. Turns steam, vacuum- or hydraulic-pressure, or solution valves in response to signals. Tends pumps to...
Deck Engineer: Repairs and maintains deck machinery, like cargo winches anchor windlasses. Operates machinery to define causes of malfunctioning. Dismantles, repairs, or replaces defective parts and reassembles machine...
Slab Lifting Engineer: Operates hydraulic jacks to raise precast concrete floors roof slabs into position. Directs Hydraulic-Jack Adjusters engaged in erecting scaffolds, hoisting and installing hydraulic jacks on top of support columns, erecting lift rods and fastening them to jack support plates set in concrete slab. Measures marks grade lines on support columns. Connects pump and jacks to control panel, and positions panel on slab so t...
Supervisor Nut Processing: Supervises coordinates activities of workers engaged in cracking, sorting, blanching, cutting, grinding, roasting, packing, and shipping nuts. Sets up repairs nut-processing machines, like nut-cracking machine, meat grading machine, or nut-cutting machines. Observes operation of machines ...
Retort Engineer: Controls one or more cylinder retorts to impregnate wood products, like railroad ties, piling, telephone poles, and fenceposts, with preserving or fireproofing chemicals. Turns valves to admit treating solution into retort steam into heating coils. Presses buttons to activate vacuum- & hydraulic-pressure pumps that remove air and steam from retort force treating solution into pores of wood to accelerate treatment process. Observes gauges and turns valves to maintain specified heat, vacuum hydraulic pressure, and level of...
Highway administrative Engineer: Administers statewide highway planning, design, construction, and maintenance programs. Coordinates activities of state highway engineering agencies. Reviews highway & bridge plans, location, contracts and cost estimates for technical legal accuracy and approves acceptable proposals or makes corrective recommendations. Directs workers in research activities related to highway planning and engineering, and formulate...
Port Engineer: Coordinates repair and maintenance functions furnished operating fleet to minimize loss of revenue cost of repairs. Reviews repair request and compares request with previous work accomplished on ship concerned similar vessels to define that expenditures are economically sound. Prepares recommendations for work and initiates procurement of materials. Inspects machinery, equipment, or spaces outlined in work request, draws up job specifications, and obtains bids from contractors or shipyards to perform repairs. Maintains contact with contractors ...
Manufacturing Engineer Chief: Directs and coordinates research development activities for organizational products, services, or ideologies. Plans and formulates aspects of research & development proposals, like objective or purpose of project, applications that can be utilized from findings, costs of project and equipment human resource requirements. Reviews & analyzes proposals submitted for defining if benefits derived possible applications justify expenditures. Approves and submits proposals considered feasible to management for consideration allocation of funds ...
Photonics Engineer: Select, purchase, set up, operate, or troubleshoot state-of-the-art laser cutting equipment. Analyze, fabricate, or test fiber-optic links. Design electro-optical sensing or imaging systems. Design laser-machining equipment for purposes like high speed ablation. Develop laser-processed designs, like laser-cut medical devices. Determine commercial, industrial, scientific, or other uses for electro-optical applications or devices. Conduct research on new photonics technologies. Design, integrate, or test photonics systems or components. Analyze system performance or operational...
Wind Energy Engineer: Write reports to document wind farm collector system test results. Oversee the work activities of wind farm consultants or subcontractors. Recommend process or infrastructure changes to improve wind turbine performance, reduce operational costs, or comply with regulations. Investigate experimental wind turbines or wind turbine technologies for properties like aerodynamics, production, noise, and load. Test wind turbine equipment to define effects of stress or fatigue. Test wind turbine components, using mechanical or electronic testing equipment. Provide engineering te...
Pickle Processor: Pickles prepared food products in preservative or flavoring solutions. Mixes ingredients, like salt, vinegar, or sugar in barrels, vats, or tanks, according to formula, to make pickling or flavoring brine. Dumps product, like vegetables, fruit, fish, fish eggs, or meat into solution to soak for specified time. May pack product into barrels in layers, covering each layer with preservative compound. M...
Supervisor Dairy Processing: Supervises coordinates activities of workers engaged in producing , like milk, butter, cheese, and evaporated milk in liquid, solid, or powdered form. Directs workers in receiving and testing milk in operations, like pasteurizing, separating, evaporating, drying, cooling and storing
Feels, tastes and smells cheese samples for defining types of cheeses required for specified blend. Examines samples of evaporated milk, orders changes in cooking temperature, and adds measured amounts of calcium or ...
Solar Energy Systems Engineer: Test or evaluate photovoltaic PV cells or modules. Review specifications recommend engineering or manufacturing changes to achieve solar design objectives. Perform thermal, stress, or cost reduction analyses for solar systems. Develop standard operation procedures quality or safety standards for solar installation work. Design or develop vacuum tube collector systems for solar applications. Provide technical direction or support to installation teams during installation, start-up, testing, system commissioning, or performance monitoring. Perform computer simula...
Videotape Engineer: Sets up and operates videotaping equipment to record play back television programs, applying knowledge of videotaping equipment operation. Reads television programming log to ascertain program to be recorded or program to be aired. Selects source, like satellite or studio, from which program will be recorded and selects videotaping equipment on which program will be recorded. Observes monitor to verify that station is on-air, and informs supervisor if station not on-air. Cleans videotape path to remove contaminants that would affect quality of reco...
Power transmission Engineer: Lays out plans estimates costs for constructing transmission lines high-tension facilities for carrying power from source to distributing points
Visits proposed construction site and selects best shortest route to avoid interference with telephone or other lines. Submits data on proposed route to right-of-way department for obtaining necessary easements. Arranges for aerial, topographical, and other surveys to be made to obtain pertinent data for planning lines. Devises steel and wood supporting structures f...
Production Technician Semiconductor Processing Equipment: Cleans and maintains wafer processing machines and equipment mixes chemical solutions, following production specifications. Reads work orders and specifications to define machines equipment requiring replenishment of chemical solutions. Measures & mixes chemical solutions, using graduated beakers funnels. Pours chemical solutions into wafer processing machine tanks to replenish machine supplies. Cleans furnace accessories, like quartz tubes stainless steel tubing, using chemical solutions. Removes broken quartzware a...
Ordnance Engineer: Designs, tests, and coordinates development of explosive ordnance material to meet military procurement specifications to prepare project proposals for negotiating production contracts. Participates in discussions with military authorities to define characteristics desired in explosive material, nature of target objective and type of delivery system to be used. Prepares or directs preparation of design drawings & specifications for approval by procurement authorities, according to knowledge of explosives plastics chemistry, ballistics theory, fuse technology, me...
Biofuels Processing Technician: Calculate, measure, load, or mix refined feedstock used in biofuels production. Operate chemical processing equipment for the production of biofuels. Operate equipment, like a centrifuge, to extract biofuels products secondary by-products or reusable fractions. Operate valves, pumps, engines, or generators to control adjust biofuels production. Process refined feedstock with additives in fermentation or reaction process vessels. Assess the quality of biofuels additives for reprocessing. Calibrate liquid flow devices meters including fuel, chemical, and wat...
Photographic Engineer: Designs and constructs special-purpose photographic equipment and materials for use in scientific or industrial applications, utilizing knowledge of various engineering disciplines, chemistry, and photographic equipment techniqu...
Texturing Process Quality Control Checker: Inspects yarn texturing machines packages of textured yarn to appraise quality of texturing process. Inspects doff yarn for making sure processing of yarn by texturing machines meets company performance standards. Reads temperature from gauges on thermal unit of texturing machines, records number of malfunctioning thermal units and calibrates temperature gauges, using thermometer. Monitors spin...
Psychologist Engineering: Conducts research, development, application, and evaluation of psychological principles relating human behavior to characteristics, design, and use of environments and systems within which human beings work live. Collaborates with equipment designers in design, development and utilization of man-machine systems to obtain optimum efficiency in terms of human capabilities. Advises on human factors to be considered in design of man-machine systems, military equipment and industrial products. Participates in solving such problems as de...
Operating Engineer: Learn follow safety regulations. Take actions to avoid potential hazards or obstructions, like utility lines, other equipment, other workers, or falling objects. Adjust handwheels depress pedals to control attachments, like blades, buckets, scrapers, or swing booms. Start engines, move throttles, switches, or levers, or depress pedals to operate machines, like bulldozers, trench excavators, road graders, or backhoes. Locate underground services, like pipes or wires, prior to beginning work. Monitor operations to make sure that health safety standards are met. Align machine...
Tooling Coordinator Production Engineering: Coordinates activities of engineering, tool design, purchasing, and other departments, to facilitate production or procurement of tooling. Evaluates tooling orders received from production engineering department to define whether tooling should be manufactured in-house or procured from outside vendor. Examines blueprints for defining tool requirements special materials or items to be ordered. Calculates records tool requirement data on tooling order, and routes order to tool design or purchasing de...
Supervisor Uranium Processing: Supervises coordinates activities of workers engaged in processing uranium ore to recover uranium oxide. Trains w...
Studio Operations Engineer in charge: Directs coordinates radio or television station activities concerned with acquisition, installation, and maintenance, or with modification of studio broadcasting equipment. Evaluates studio needs for new broadcasting equipment to define if acquisition would be justified considering such factors as cost, availability and improvement gain in technical performance and authorizes acquisition according to evaluation. Directs activities concerned with layout & design of electrical circuitry for acquired equipment to make sure conformance with codes ...
Process Controller: Verifies performance of yarn texturing machines for conformance to specifications, using test equipment instruments. Reviews work order to define machine to be checked type of inspection required. Inspects machines for threading problems, like incorrect placement of yarn opened feed rollers. Measures operation of machine components, like oil roller, transverse bar, and rotating shaft of feed roll, to measure operation of machine, using counter, speed indicator, and stopwatch. Observes as...
Drafter Civil Engineering: Drafts detailed construction drawings, topographical profiles, and related maps and specifications used in planning and construction of civil engineering projects, like highways, river harbor improvements, flood control, and drainage. Reviews rough sketches, drawings, specifications and other engineering data received from Civil Engineer profess. kin. 005.061-014. Plots maps & charts showing profiles and cross-sections, indicating relation of topographical contours elevations to buildings, retaining walls, tunnels, overhead p...
Liaison Engineer: Coordinates activities to evaluate resolve engineering-related production problems encountered in assigned area of aircraft manufacturing facility. Reviews production schedules, engineering specifications, orders and related information to maintain current knowledge of manufacturing methods, procedures and activities in assigned area. Confers with quality control, material, manufacturing and other department personnel to provide technical support. Interprets engineering drawings and facilitates correction of errors on drawings documents identified...
Pigment Processor: Tends one or more equipment units, like reaction tanks, bleach tanks, wash tanks, filters, dryers, furnaces, and mills to process pigments, like titanium, barytes, bentonite, and iron oxide for use in products, like paint, industrial coating, rubber, plastic, and ink. Pushes buttons on control panel turns valves...
Chief Engineer Waterworks: Plans directs activities concerned with water utility systems installation, operation, maintenance, and service. Directs activities of engineers engaged in preparing designs plans to construct, enlarge and modify such facilities as water treatment plants, watersheds and dams, hydroelectric stations, pumping stations and to install water mains and other appurtenances. Provides engineering & technical direction for planning design of water utility projects. Reviews plans specifications prior to instituting project to define whether ...
System Engineer Or Architect: Communicate with staff or clients to understand specific system requirements. Provide advice on project costs, design concepts, or design changes. Verify stability, interoperability, portability, security, or scalability of system architecture. Collaborate with engineers or software developers to select appropriate design solutions or ensure the compatibility of system components. Evaluate current or emerging technologies to consider factors like cost, portability, compatibility, or usability. Provide technical guidance or support for the development or troubleshoot...
Maintainability Engineer: Analyzes engineering design of proposed product, like aircraft, naval vessel, or electronic control or navigation system, and submits specifications for maintenance requirements, utilizing knowledge of maintainability engineering related technologies. Analyzes customers initial proposal for product utilization and recommends basic product specifications techniques for satisfying customer requirements. Reviews engineering specifications & drawings during development proposes design refinements to improve ratio of operational time to maintenance time. Pa...
Soils Engineer: Studies and analyzes surface subsurface soils to define characteristics for construction, development, or land planning. Inspects proposed construction site and sets up test equipment and drilling machinery to obtain data & soil rock samples. Analyzes data & soi...
Fuel Cell Engineer: Write technical reports or proposals related to engineering projects. Read current literature, attend meetings or conferences, or talk with colleagues to stay abreast of new technology or competitive products. Validate design of fuel cells, fuel cell components, or fuel cell systems. Simulate or model fuel cell, motor, or other system information, using simulation software programs. Recommend or implement changes to fuel cell system designs. Provide technical consultation or direction related to the development or production of fuel cell systems. Plan or conduct experiments t...
Mechanical Equipment Engineering Assistant: Develops detailed design drawings and related specifications of mechanical equipment, according to engineering sketches design proposal specifications. Analyzes engineering sketches, specifications and related data drawings to define design factors, like size, shape and arrangement of parts. Sketches rough layout of machine computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, leverages and location of holes. Computes magnitude, direction, and point of application of tension, compressio...
Centrifuge Operator Plasma Processing: Tends centrifuges which separate plasma from whole blood for extraction of plasma. Packs plastic bags containing freshly drawn whole blood whole blood units into designated containers in centrifuge. Fastens centrifuge cover depresses switch to activate centrifuge mechanism. Removes centrifuged whole blood units after designated time, examines each to confirm separation of plasma from whole blood, and places each whole blood unit in plasma extractor, positioning holes at top of plastic bag on metal prongs. Inserts plastic tube of transfer unit into e...
Studio Engineer: Operates console to regulate volume level and quality of sound during filming of motion picture, phonograph recording session, or television radio productions. Determines acoustics of recording studio adjusts controls to specified levels. Directs installation of microphones amplifiers for use in sound pickup. Turns knobs and dials on console while recording to cut microphones in ...
Aeronautical Project Engineer: Directs and coordinates activities of personnel engaged in designing mechanisms, structures, systems, and equipment for aeronautical or aerospace products, applying knowledge of engineering theory technology. Reviews evaluates product request from customer and formulates conceptual design to meet customer requirements. Analyzes project proposal for defining feasibility, producibility, cost and production time and discusses proposal with customer representatives, engineers and add...
Supervisor Channel Process: Supervises and coordinates activities of workers engaged in producing carbon black by channel process [partial combustion of natural gas in burner build...
Supervisor Natural gas field Processing: Supervises and coordinates activities of workers engaged in sampling testing natural gas, and controlling processing equipment at oil field installations. Directs workers in inspection of storage tanks, regulators, traps and dehydration plants. Orders sample taking & field testing for defining specific gravity, vapor...
Tanner Rotary Drum Continuous Process: Operates rotary drum to remove hair and other solubles from hides or skins convert hides or skins into leather or glue during continuous process. Loads drum with hides, skins, or other animal stock. Turns valves to admit water steam to drum. Weighs mixes specified amounts of lime, salt, and other chemicals in mixing tank or drum, following formula, to prepare liming, deliming, pickling, and tanning solutions used in treating hides or skins. Turns valve to transfer solutions to drum during ...
Stationary Engineer And Boiler Operator: Activate valves to maintain required amounts of water in boilers, to adjust supplies of combustion air, and to control the flow of fuel into burners. Monitor boiler water, chemical, and fuel levels, and make adjustments to maintain required levels. Fire coal furnaces by hand or with stokers gas- or oil-fed boilers, using automatic gas feeds or oil pumps. Monitor and inspect equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters to detect leaks or malfunctions and to make sure that equip...
Head Refrigerating Engineer: Supervises coordinates activities of Refrigerating Engineers engaged in operating refrigerating equipment to provide ice or to cool refrigerating rooms in establishments, like ice cream plants, frozen food wareho...
Compressor Engineer: Tends air compressors driven by steam, electric, or gasoline powered units, to generate supply compressed air for operation of pneumatic tools, hoists, and air lances. Starts power unit to build up specified pressure in compressor. Adjusts controls or sets automatic controls to maintain continuous air supply to pneumatic tools or equipment. Observes temperature and pressur...
Shellfish Processing Laborer: Performs any combination of following tasks concerned with fresh packing, canning, freezing, or smoking shellfish. Transports shellfish, shellfish meats, cans, or cases to work area manually, or using wheeled hopper, handtruck, or power hoist. Loads conveyors, hoppers, or handtrucks with product, cans, or cases. Spreads shellfish on conveyor, drenches them with water, and removes foreign matter. Weighs shellfish or shellfish meat, using scales. Records weight of product on standard form. Sorts shellfish according to size, and trims off unusable portions, u...
Architectural And Engineering Supplies Sales Representative: Sells architectural and engineering supplies, like protractors, slide rules, triangles, and T-squares, to business industrial establishments....
Quality Control Checker Texturing Process: Inspects yarn texturing machines packages of textured yarn to appraise quality of texturing process. Inspects doff yarn for making sure processing of yarn by texturing machines meets company performance standards. Reads temperature from gauges on thermal unit of texturing machines, records number of malfunctioning thermal units and calibrates temperature gauges, using thermometer. Monitors spin...
Data Network Engineer: Maintain a thorough understanding of the basics behind the internet its workings [dns, security, ip routing, http, vpn, email routing, spam, etc]. Configure and setup firewalls, vpn concentrators security appliances for access to vital business applications. Design, setup configure complex switching environments. Design, setup and configure complex wireless networking that supports open or secured access and the ability to support voice video applications. Maintain a thorough understanding of local area networking. Assist in the design of multi-server en...
Engineering Drawings Checker: Examines engineering drawings of military commercial parts, assemblies, and installations to detect errors in design documents. Compares figures lines on production drawing or diagram with production layout, examining angles, dimensions, bend allowances and tolerances for accuracy. Determines practicality of design, material selection, available to...
Assistant Engineer: Monitors locomotive instruments watches for dragging equipment, obstacles on right-of-way, and train signals during run. Inventories supplies, like fuel, water and sand, for making sure safe, efficient operation during run. Inspects locomotive to detect damaged or worn parts. Observes oil, temperature, and pressure gauges on dashboard to ascertain if engine is operating safely efficiently. Observes track from left side of locomotive to detect obstructions on tracks. Observes train signals along route verifies their meaning for Locomotive Engineer r.r. Observes ...
Railroad Engineer: Designs railroad and street railway tracks, terminals, yards, and other facilities and directs and coordinates construction relocation of facilities. Plans roadbed, rail size and curves to meet train speed load requirements. Directs, through subordinate supervisors, con...
Washer engineer Helper: Assists Washer Engineer paper and pulp in bleaching washing cooked rags used in making paper. Removes covers from boiler, using hoist wrenches. Positions stock boxes under boiler openings to receive cooked rags. Removes rags stuck in boiler, using metal hook. Pushes loaded boxes to washer d...
Diesel engine Engineer: Operates gasoline, natural gas, or diesel engines to supply power for rotary oil well drilling machinery. Starts engines observes drilling operations to provide power under operating conditions. A...
Process Cheese Cooker: Tends vat to cook blended cheeses or cheese curd other ingredients to make process cheese. Starts agitator signals for cheese to be dropped into vat. Turns steam valve observes thermometer to heat vat to specified temperature. Measures or weighs out prescribed ingredients, like sodium citrate, disodium phosphate, and cream, using scale measuring glass. Dumps ingredients into vat. Cooks m...
Electromechanical Engineering Technologist: Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems for making sure proper functioning. Modify, maintain, or repair electrical, electronic, or mechanical components, equipment, or systems to make sure proper functioning. Specify, coordinate, or conduct quality-control or quality-assurance programs procedures. Establish maintain inventory, records, or documentation systems. Fabricate or assemble mechanical, electrical, or electronic components or assemblies. Select electromechanical equipment, materials,...
Production Engineering Tooling Coordinator: Coordinates activities of engineering, tool design, purchasing, and other departments, to facilitate production or procurement of tooling. Evaluates tooling orders received from production engineering department to define whether tooling should be manufactured in-house or procured from outside vendor. Examines blueprints for defining tool requirements special materials or items to be ordered. Calculates records tool requirement data on tooling order, and routes order to tool design or purchasing de...
Methods Analyst Data Processing: Analyzes data processing requirements to plan data processing system that will provide system capabilities required for projected work loads, and plans layout installation of new system or modification of existing system. Confers with data processing and project managers to obtain information on limitations & capabilities of existing system and capabilities required for data processing projects projected work load. Evaluates factors like number of departments serviced by data processing equipment, reporting formats required, volume of tr...
Electrical Engineering Technician: Install or maintain electrical control systems or solid state equipment. Modify electrical prototypes, parts, assemblies, or systems to correct functional deviations. Set up operate test equipment to evaluate performance of developmental parts, assemblies, or systems under simulated operating conditions, and record results. Collaborate with electrical engineers or other personnel to identify, define, or solve developmental problems. Build, calibrate, maintain, troubleshoot, or repair electrical instruments or testing equipment. Analyze interpret test inf...
City planning Engineer: Develops comprehensive plans and programs for utilization of land physical facilities of cities, counties, and metropolitan areas. Compiles and analyzes data on economic, social and physical factors affecting land use and prepares or requisitions graphic narrative reports on data. Confers with local authorities, civic leaders, social scientists and land planning & development specialists to devise and recommend arrangements of land physical facilities for residential, commercial, industrial and community uses. Rec...
Circulating Process Inspector: Inspects machined parts and mechanical or electrical assembly of electrical equipment to detect defective assemblies ensure quality of production. Verifies dimensions and location or alignment of layouts of mechanical assemblies electrical contacts, using micrometers, calipers, squares, rules, protractors, dial indicators, scales and gauges. Compares machined surfaces with finished blocks. Examines parts to detect cracks, flaws, damaged surfaces, and burrs to make sure completeness. Stops defective assembly or machining operations notifies supe...
Chemical milling Processor: Etches specified portions of metal parts materials used in manufacturing aircraft, using immersion equipment, templates, handtools, and precision measuring instruments. Reads work order, blueprints and process specifications to define location of etch, finished dimensions and method sequence of operations. Cleans surface of parts materials to make sure uniform adhesion of maskant. Applies maskant to surfaces to be etched, scribes etch lines, using template, and removes maskant from etch areas. Immerses parts materials i...
Stationary engineer Supervisor: Supervises and coordinates activities of Stationary Engineer and other workers operating and maintaining stationary engines & mechanical equipment, like steam eng...
Power distribution Engineer: Plans construction coordinates operation of facilities for transmitting power from distribution points to consumers. Lays out substations and overhead & underground lines in urban rural areas. Prepares specifications estimates costs. Makes complex electrical computations to define type and arrangement of circuits and size, type number of pieces of equipment, such as transformers, circuit breakers, swit...
Mud Engineer: Plans directs mud-sample testing operations. Consults with Superintendent, Oil-Field Drilling petrol. and gas interprets drilling logs to define status of wells being drilled. Plans & coordinates itinerary for Well-Logging Captain, Mud Analysis petrol. as...
Industrial Hygiene Engineer: Plans and coordinates private or government industrial health program requiring application of engineering principles and technology to analyze and control conditions contributing to occupational hazards diseases. Conducts plant or area surveys to define safe limits of exposure to materials or conditions, like temperatures, noise, dusts, fumes, vapors, mists, gases, solvents, radiation ...
Industrial Engineering Technologist: Interpret engineering drawings, sketches, or diagrams. Prepare schedules for equipment use or routine maintenance. Request equipment upgrades or purchases. Supervise production workers. Create computer applications for manufacturing processes or operations, using computer-aided design CAD or computer-assisted manufacturing CAM tools. Oversee or inspect production processes. Prepare reports regarding inventories of raw materials or finished products. Modify equipment or processes to improve resource or cost efficiency. Develop or conduct quality control te...
Beater Engineer: Controls beater engines related equipment to process furnish for making paper, roofing felt, and related products. Starts pumps adjusts valves to regulate flow of specified amount of slush pulp into vat. Starts engines & adjusts beater rolls to obtain specified degree of pulp fineness hydration. Examines furnish for specified consistency size of fibers. Dips sample...
Marine Engineer: Design and oversee testing, installation, and repair of marine apparatus equipment. Prepare plans, estimates, design construction schedules, and contract specifications, including any special provisions. Investigate and observe tests on machinery equipment for compliance with standards. Coordinate activities with regulatory bodies to make sure repairs alterations are at minimum cost, consistent with safety. Conduct environmental, operational, or performance tests on marine machinery equipment. Prepare technical reports for use by engineering, man...
Biomedical Engineering Technician: Repairs, calibrates, and maintains medical equipment instrumentation used in health-care delivery field. Inspects and installs medical & related technical equipment in medical research facilities for use by physicians, nurses, scientists, or engineers involved in researching, monitoring, diagnosing and treating physical ailments or dysfunctions. Services various equipment & apparatus, like patient monitors, electrocardiographs, blood-gas analyzers, x-ray units, defibrillators, electrosurgical units, anesthesia apparatus, pacemakers, blood-pr...
Chief Compressor station Engineer: Supervises and coordinates activities of workers engaged in operation maintenance of compressor-station equipment, like gas compressors, stationary engines, and pipelines to transmit natural gas. Directs workers to start or stop compr...
Lead nitrate Processor: Tends heated kettle and auxiliary equipment to process molten lead nitric acid into lead nitrate. Loads lead-melting kettle with lead ingots, using hoist. Turns valves to regulate flow of fuel oil air and tends stoker or shovels coal to fire furnace that melts lead in kettle. Ladles molten lead into trough or tips melting kettle to pour molten lead into trough for transfer to vat containing nitric acid where ingredients combine to form lead nitrate. Turns outlet valve to transfer lead n...
Mail processing equipment Mechanic: Repairs and maintains mail-processing equipment, like letter-canceling machines, letter-facing-and-canceling machines, mail-sorting machines, and conveyor systems, following blueprints schematic diagrams, using handtools, power tools, and electrical testing instruments. Inspects machine to locate causes of trouble, using ammeters, ohmmeters, relay testers and other testing instruments. Dismantles machine, using handtools power tools. Repai...
Process Engineer Job Description RSS News

[ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ]